Advertisement
M A I N T E N A N C E
Removing or Installing UV Lamp
1.
Turn off and unplug the unit
2.
Press the Lock & Release Button and
remove the Rear Cover from the unit
3.
Remove the HEPA filter.
4.
Use a screwdriver to remove the
two screws and detach the UV lamp
cover. The HEPA Filter will only fit in
one way. Install the rear cover back
to the unit and securely latch in
place.
5.
Grasp the UV lamp and pull it
straight out from the lamp socket.
The lamp is made of quartz so it is
stronger than a standard UV lamp
however we recommend reaching in
toward the base since it is easier to
remove from here than pulling on
the end of the lamp.
6.
Take a new UV lamp and insert it
into the lamp socket. Simply press in
on the end of the glass lamp to snap
into place. Re-install the UV lamp
cover (the large metal face should be
above the uv lamp and align the two
screw holes with the back of the air
purifier), then install the filter and
rear cover.
7.
Please reference www.oransi.com
for more information including a
video demonstration that shows how
to replace the UV lamp
CAUTION: UV lamp is a glass product,
please handle it carefully.
NOTE: The metal cover over the lamp
must be in place for the air purifier to
operate.
12
Advertisement
