TECHCON SYSTEMS TS555R User Manual page 14

3. Enter the delay time (ex. 5000 ms)
NOTE: The minimum delay time is 15ms
4. Touch the "Continuous Run" icon
5. Touch the Check Mark icon to save
6. Touch the X icon to exit
The screen will look similarly to the screen below:
Note: If the controller is set to activate memory cell 1 and the delay time is
set at 5000 ms, the controller will activate memory 1 continuously with
5000 ms delay between each activation.
5.3.3 To run in Single Sequence Mode
1. Touch the "Run Method" icon to enter sequence mode setup
14