Miele TEA 225 WP Operating Instructions Manual page 47

Problem
The  indicator light
comes on.  and 
continue to flash after a
programme has been
cancelled despite thor-
ough cleaning.
 and another number
combination flash after
a programme has been
cancelled, a signal
sounds
Cause and remedy
The plinth filter looks clean after thorough cleaning.
However, the programme terminates and the fault
message appears again. It is likely that the filter con-
tains residue further down inside that could not be
removed.
 To deactivate the message, turn the programme
selector to the  position.
 Check for the possible causes described below.
The heat exchanger is clogged.
 Check the heat exchanger. Follow the instructions
in "Problem solving guide – Checking the heat ex-
changer".
The plinth filter is clogged further down.
 Check the plinth filter. Follow the instructions de-
scribed in "Problem solving guide – Replacing the
plinth filter".
 If the plinth filter is not out of shape or damaged,
you can reactivate it in a washing machine. Follow
the instructions described in "Problem solving
guide – Reactivating the plinth filter".
No obvious cause.
 Switch the dryer off and then on again.
 Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.
Problem solving guide
47