Miele TEA 225 WP Operating Instructions Manual page 27

Starting the programme
Start/Add laundry flashes on and off on
the display.
 Touch the  sensor control.
Start/Add laundry will light up on the
display.
Once the programme has started, the
running time will appear on the time
display.
- The PerfectDry indicator will only
flash/light up for programmes with
selectable drying levels (see also
"Operating the tumble dryer").
- The tumble dryer measures the resid-
ual moisture of the laundry and cal-
culates the required programme run-
ning time accordingly.
If you barely place anything inside the
tumble dryer or load it with dry laun-
dry, this will be sensed by the empty
drum detection feature. The auto-
matic load recognition function will
restrict the running time of the selec-
ted programme once it has started.
The fabrics will be gently dried or
aired. In this case, the PerfectDry in-
dicator does not light up at the end of
the programme.
To prevent laundry wearing out
avoid overdrying it.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
3. Select a programme and start it
 Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
Adding laundry
You can add laundry items after the
programme has started.
 Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
27