How The Sensor Controls Work - Miele TEA 225 WP Operating Instructions Manual

f  sensor control (Start/Add laun-
dry)

The programme can be started
as soon as Start/Add laundry is
flashing on and off. Touching
the  sensor control starts
the selected programme. Start/
Add laundry will light up con-
stantly on the display.
 Once the programme has been
started, the  sensor control
allows you to add laundry.
g Time display
After the programme has started, the
programme running time will appear
on the display in hours and minutes.
– When Delay start is being used,
the programme running time will
appear after the Delay start period
has elapsed.
– With most programmes, the run-
ning time displayed may vary or
"jump". The following factors,
among others, affect the pro-
gramme running time displayed:
the quantity of laundry, the type of
fabric and the residual moisture in
the laundry. The electronic module
adapts to these factors with in-
creasing accuracy.
h Optical interface
This is used by the Customer Ser-
vice Department as a transmission
point.
Operating the tumble dryer
i Programme selector
For selecting programmes and for
switching off the appliance. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to the  position.

How the sensor controls work

The sensor controls select/adjust the
values located above them.
The , ,  and  sensor controls re-
act to fingertip contact.
19