hanshow Lumina Aqua-1010 Series Product Manual page 8

Hanshow Lumina Aqua-1010 Series Product Manual
The key components of Lumina Aqua-1010 series and their description are shown in
Figure 2-2 and Table
Table 2-1 Key components description for Lumina Aqua-1010
No. Name
1 LCD display area
2 Barcode area
3 Fixed slot baffle
4 Waterproof Type-C
5 Cover plate
6 Nameplate area
7 Hook
8 Power cable
9 Power rail
10 Hanging accessories
11 NFC coil area
4
2-1.
Figure 2-2 Key components of Lumina Aqua-1010
Used to display full-color image and video.
Located at the bottom for pasting an 18-digit ID barcode, as
shown in
Removable, and also rotate 90 degrees to install.
Used for power supply, and also used as a debugging
interface.
Used to fix and protect the power cable.
Located under the cover plate, as shown in
An accessory with a wire groove on the rear for fixing Lumina
Aqua-1010 device.
One end is a Type-C male, and the other is a rotary terminal
connected to a power rail.
For Lumina Aqua-1010 power supply.
With different sizes available for various installation
environments.
It indicates NFC coil area.
Description
Figure 2-4.
Figure 2-4.
Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.