Choosing The Right Cookware; Using Your Hob - Technika 95HTSS-5 Instructions For Use And Installation

Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the
same size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
10

Using your Hob

To start cooking
1. Touch the ON/OFF key, all the indicators show "– "
2. Place a suitable pan on the cooking zone that you
wish to use. Make sure the bottom of the pan and
the surface of the cooking zone are clean and dry.
3. Select the heating zone you wish to use. The
indicator next to the key will flash "5". (This is the
default power level when switching on a zone)
4. Adjust the heat setting as required by touching the "Slider"
control.
If you don't choose a heat setting within 1 minute, the
•
Induction hob will automatically switch off. You will
need to start again at step 1.
• You can modify the heat setting at any time
during cooking by selecting the heating zone, then
touching the "Slider" control
When you have finished cooking
1. Select the heating zone that you wish to switch off
2. Turn the cooking zone off by scrolling down to"0" on the
"Slider" control. Make sure the display shows"0".
3. Turn the whole cooktop off by touching the ON/OFF
key .
Beware of hot surfaces
When "H" is displayed: the cooking zone is too hot to touch. It will
disappear when the surface has cooled down to a safe temperature. It can also be
used as an energy saving function if you want to heat further pans, use the
hotplate that is still hot.
11