Advertisement
4. Once the framing is completed, install the Blower &
Base assembly as shown in Figures 3 - 9. The Blower &
Base assembly can be installed in the wall in any of four
positions which allows flexibility of the venting connection
to the blower.
14 ½"
14-1/2"
14 1/2"
42929-2-0721
BACK EDGE OF BLOWER
BACK EDGE OF BLOWER BASE BRACKET TO
BASE BRACKET TO
BE MOUNTED FLUSH TO THE INSIDE WALL
BE MOUNTED FLUSH
TO THE INSIDE WALL
VENT CONNECTION
VENT
CONNECTION
(RIGHT SIDE)
OFFSET FLANGE TO
OFFSET FLANGE TO BE FLUSH WITH
BE FLUSH WITH INSIDE
INSIDE WALL, AND SECURED
WALL, AND SECURED
Figure 4
TOP VENT
CONNECTION
Figure 5
Empire Comfort Systems Inc. • Belleville, IL
VENT
CONNECTION
(LEFT SIDE)
(RIGHT SIDE)
BOTTOM VENT
CONNECTION
Figure 6
Figure 7
Page 5
Advertisement
