Empire Comfort Systems VFLB36FP30N Installation Instructions Manual page 3

LOCATING THE HEAT MANAGEMENT SYSTEM
1. Determine the location of the HMFA in relationship to
the fireplace. Placement of the HMFA blower system in
42929-2-0721
HMFA Framed Opening Minimum Distance From Fireplace
ALL APPLICATIONS REQUIRE
ALL APPLICATIONS REQUIRE A MIN. OF 7' ALL APPLICATIONS REQUIRE A MIN. OF 7'
A MINIMUM 7' LENGTH OF
LENGTH OF FLEX VENT FROM THE DUCT LENGTH OF FLEX VENT FROM THE DUCT
FLEX VENT FROM THE DUCT
TO THE BLOWER
TO THE BLOWER
Minimum Length Of Flex Vent
NOTE: Flex venting from kit SD6DFA25.
Empire Comfort Systems Inc. • Belleville, IL
relationship to the fireplace is indicated with minimum framed
opening dimensions and vent length requirements as shown
in Figures 1 and 2.
4' MIN.
4' MIN
Figure 1
TO THE BLOWER
Figure 2
EXTERIOR
EXTERIOR
WALL
WALL
Page 3