Advertisement
INSTALLATION OF NON-COMBUSTIBLE BOARD
The non-combustible board included with the VFLB fireplace
will be attached according to the methods called out in the
VFLB installation manual, but the board must be cut to work
with the HMFA(36,48,60,72)P Heat Transfer Kit.
11. Consult the wall finishing options in the VFLB installation
manual and see Figures 14 and 15 below.
12. Cut the non-combustible board according to the chosen
wall finishing method.
42929-2-0721
For Optional HMFATV Television Kit:
13. Drill a 1-1/2" hole centered 13-7/8" above the duct inlet
Non-Combustible Board, Finishing Option 1
Figure 14
Empire Comfort Systems Inc. • Belleville, IL
opening as shown in Figures 14 and 15 below.
Due to sharp edges and the weight of the assembly,
please use proper eye protection and gloves to reduce
the potential for injuries.
CAUTION
Page 11
Advertisement
