Disassembly - Sharp CD-C410W Service Manual

CD-C410W/C415W/C420W,CP-C410/C415/SR410
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need be
removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
CD-C410W/CD-C415W/CD-C420W
STEP REMOVAL
1 Top Cabinet 1. Screw ..................... (A1) x4
2 Side Panel 1. Screw ..................... (B1) x6
(Left/right)
3 CD Player Unit/ 1. Turn on the power supply,
CD Tray Cover open the disc tray, take out
the CD cover, and close.
(Note 1)
2. Hook ....................... (C1) x3
3. Hook ....................... (C2) x2
4. Socket .................... (C3) x4
4 Back Board 1. Screw ..................... (D1) x6
5 Main PWB/ 1. Screw ..................... (E1) x14
Display PWB/ 2. Socket .................... (E2) x4
Headphone PWB/
Switch PWB
6 Front Panel 1. Screw ..................... (F1) x2
2. Hook ....................... (F2) x2
7 Tape Mechanism 1. Open the cassette holder.
2. Screw...................... (G1) x6
8 Turntable 1. Screw ..................... (H1) x1
2. Cover ...................... (H2) x1
9 Disc Tray 1. Screw ..................... (J1) x2
2. Guide ...................... (J2) x2
10 CD Changer 1. Screw ..................... (K1) x4
Mechanism
11 CD Mechanism 1. Screw ..................... (L1) x1
Note 1:
How to open the changer manually. (Fig. 6-3)
1. Insert the tip of fine screwdriver into the hole of CD player
base, and press down the worm wheel < A > .
2. Then, turn fully the lock lever in the arrow direction through
the hole on the loading chassis bottom in this state.
After that, push forward the CD player base.
CP-C410
STEP REMOVAL
1 Speaker 1. Front panel ............. (A1) x1
2. Screw ..................... (A2) x4
CP-SR410
STEP REMOVAL
1 Top cabinet 1. Screw ..................... (B1) x6
CP-C415
STEP REMOVAL
1 Speaker 1. Front panel ............. (C1) x1
2. Screw ..................... (C2) x4
All manuals and user guides at all-guides.com

DISASSEMBLY

PROCEDURE FIGURE
6-1
6-1
6-2
6-2
7-1
7-1
7-2
7-3
7-3
7-4
7-4
PROCEDURE FIGURE
7-5
7-6
PROCEDURE FIGURE
8-1
PROCEDURE
FIGURE
8-2
8-3
CD-C410W/CD-C415W/CD-C420W
Illustaration: CD-C410W/CD-C415W
( A1 ) x2
ø3 x12mm
Side Panel
(Right)
( B1 ) x1
ø3 x12mm
( B1 ) x2
ø3 x12mm
( B1 ) x2
ø3 x12mm
Hook
( C2 ) x1
Push
Driver
CD Player Unit
( D1 ) x6
ø3 x12mm
Back Board
LOCK
LEVER
– 6 –
Top Cabinet
( A1 ) x2
ø3 x12mm
Side Panel
(Left)
( B1 ) x1
ø3 x12mm
Figure 6-1
CD Tray Cover
Hook
( C1) x3
Hook
( C2 ) x1
Driver
( C3 ) x1
( C3 ) x3
Figure 6-2
< A >
Figure 6-3
Push