Donco 1015-3 FULL Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS
1015-3 FULL / FULL
MISSION BUNK BED
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
For small parts which may have come loose in-
Side the carton during shipment.
Identify and count all parts and hardware.
Compare with the parts list to be sure all parts are
present.
"DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED"
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
This bed is designed to use a full mattress (53 ½"-54 ½"x 74-75") and bunkie board (53 ½"x 74").
The total thickness must not exceed 9" inchess. Do not use mattress without the proper bunkie board of safe
foundation.
Note:There must beat least
REPLACEMENTPARTS.
Replacement parts,including additional guardrails,may be obtained from place of purchase or original
distributor.
TO OBTAIN PARTS,PLEASE CONTACT:
1-Follow the information on the warning label appearing on the upper bunk end structure and on the carton.Do
Not remove warning label from bed.
2-Always use the recommended size mattress or mattress support,or both,to help prevent the likelihood
Of entrapment or falls.
3-Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4-Do not allow children under 6 years of age to use the upper bunk.
5-Prohibit more than one person on upper bunk.
6-Periodically check and ensure that the guardrail,ladder and other components are in their properposi-
Tion,free from damage,and that all connectors are tight.
7-Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving the upper bunk.
9-Do not use substitute parts.Contact distributor or dealer for replacement parts.
10-Use of anight light may provide added safety precaution for a child using the upper bunk.
11-If the bunk bed will be placed next to a wall,the guard rail that runs the full length of the bed should
Be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guardrails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard-Never attach or hang items to any part of the bunk bed that are not designed for
Use with the bed:for example,but not limited to,hooks,belts,and jump ropes,etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
All manuals and user guides at all-guides.com
Separate,
5" inchess from top surface of mattress to top edge or guardrails.
DONCO TRADING COMPANY - FORT WORTH,TEXAS
SAFETY WARNINGS!