Download Print this page

Donco V-2004-2 Assembly Instruction Manual

Twin bunk bed kid
Hide thumbs Also See for V-2004-2:

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
V-2004-2 TWIN TWIN
BUNK BED KD
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose in-
side the carton during shipment.
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
"DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED"
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
This bed is designed to use a twin mattress ( 37 ½''- 38 ½''x 74 - 75'') and bunkie board (37 ½''x 74'').The
total thickness must not exceed
foundation.
Note:There must be at least
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distributor.
TO OBTAIN PARTS, PLEASE CONTACT:
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2-Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guardrails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
All manuals and user guides at all-guides.com
Separate,
9''
inchess. Do not use mattress without the proper bunkie board or safe
5''
inches from top surface of mattress to top edge or guardrails.
DONCO TRADING COMPANY - FORT WORTH, TEXAS
SAFETY WARNINGS!

Advertisement

loading
Need help?

Need help?

Do you have a question about the V-2004-2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Donco V-2004-2

  • Page 1 REPLACEMENT PARTS. Replacement parts, including additional guardrails, may be obtained from place of purchase or original distributor. DONCO TRADING COMPANY - FORT WORTH, TEXAS TO OBTAIN PARTS, PLEASE CONTACT: SAFETY WARNINGS! 1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed.
  • Page 2 All manuals and user guides at all-guides.com ASSEMBLY INSTRUCTIONS V-2004-2 TWIN TWIN BUNK BED KD Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
  • Page 3 All manuals and user guides at all-guides.com Part List: V-2004-2 TWIN TWIN BUNK BED KD WARNING LABELS NOT REMOVE ! Identifying the Hardware/part list- Identify the hardware using the illustrations below. 1/4" Half Moon 7,0 x 70 Screw 1/4 x 80 Screw...
  • Page 4 All manuals and user guides at all-guides.com 10x40 Wood Dowel Headbord/footboard Bottom Headboard top Hex Screwdriver Footboard top 7,0 x 100 Screw...
  • Page 5 All manuals and user guides at all-guides.com BOTTOM BED Hex Screwdriver 1/4" Half Moon 1/4 x 80 Screw 3" SIDE-RAIL 3” 19 1/2" 3" 19 1/2" Please refer to the diagram on the left for correct placement of the cross-slats 19 1/2"...
  • Page 6 All manuals and user guides at all-guides.com TOP BED HOLES Hex Screwdriver 1/4" Half Moon 7,0 x 70 Screw 1/4 x80 Screw 3" SIDE-RAIL 3" 3" 19 1/2" 19 1/2" Please refer to the diagram on the left for correct placement of the cross-slats 19 1/2"...
  • Page 7 All manuals and user guides at all-guides.com 4,0 x 30 Screw 7,0 x 50 Screw...
  • Page 8 All manuals and user guides at all-guides.com 7,0 x 70 Screw Hex Screwdriver 7,0 x 50 Screw Hex Screwdriver 7,0 x 70 Screw 7,0 x 50 Screw...
  • Page 9 All manuals and user guides at all-guides.com 7,0 x 50 Screw Hex Screwdriver 3,5x16 Screw SIDE-RAIL 4,0 x 30 Screw 3,5x16 Screw...
  • Page 10 All manuals and user guides at all-guides.com...