DeWalt Klein Tools BAT20-CW Instruction Manual page 10

Hide thumbs Also See for Klein Tools BAT20-CW:
Table of Contents

Advertisement

• DO NOT use an extension cord unless it is absolutely necessary. Use of improper
• When operating a charger outdoors, always provide a dry location and use an
• An extension cord must have adequate wire size (AWG or American Wire Gauge)
• DO NOT place any object on top of the charger or place the charger on a soft surface
• DO NOT operate the charger with a damaged cord or plug.
6
Find Quality Products Online at:
extension cord could result in risk of fire, electric shock or electrocution.
extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
for safety. The smaller the gauge number of the wire, the greater the capacity of
the cable, that is, 16 gauge has more capacity than 18 gauge. An undersized cord
will cause a drop in line voltage resulting in loss of power and overheating. When
using more than one extension to make up the total length, be sure each individual
extension contains at least the minimum wire size. The table below shows the correct
size to use depending on cord length and nameplate ampere rating. If in doubt, use
the next heavier gauge. The lower the gauge number, the heavier the cord.
Minimum Gauge for Cord Sets
Volts
Ampere Rating
120 V 25' (7.6 m) 50' (15.2 m) 100' (30.5 m) 150' (45.7 m)
(Amps)
240 V
More
Not More
Than
Than
0
6
6
10
10
12
12
16
that might block the ventilation slots and result in excessive internal heat. Place the
charger in a position away from any heat source. The charger is ventilated through
slots in the top and the bottom of the housing.
GlobalTestSupply
www.
SAFETY
Total Length of Cord
50' (15.2) 100' (30.5) 200' (61.0) 300' (91.4)
AWG
18
16
18
16
16
16
14
12
16
14
14
12
14
12
Not Recommended
.com
sales@GlobalTestSupply.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Klein tools bat20-cw1

Table of Contents