Activating Launch Control - Husqvarna FC 350 2022 Owner's Manual

8.3

Activating launch control

Info
The launch control helps the rider to generate optimum motorcycle acceleration at the beginning of a
race. The maximum speed of the engine with the throttle valve fully opened (full throttle) is reduced.
After the start, it is gradually increased up to the maximum engine speed. The clutch must be operated
exactly as it would be without launch control activated.
(FC 350 EU, FC 350 US)
–
Remove plug-in stand
H02629-10
(FX 350)
–
Take the motorcycle off side stand
side stand with rubber strap
–
Shift the transmission into neutral.
Condition
Ambient temperature: < 20 °C (< 68 °F)
–
Push the cold start button in all the way.
401944-10
–
Press start button
Info
Press the start button for a maximum of 5 seconds.
Wait for 30 seconds before a further attempt at start-
ing.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-
ion battery and thereby increase the starting power.
During the starting process, the malfunction indicator
400733-01
lamp lights up.
Condition
The motorcycle is stationary.
The engine is running at idle speed.
The transmission is in neutral.
RIDING INSTRUCTIONS 8
1
.
1
and secure the
2
.
.
29