11.20
Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
11.21
Mounting the seat
SERVICE WORK ON THE CHASSIS 11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Remove screw
V01319-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
Main work
–
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
–
Push the seat forward.
–
Make sure that the seat is locked in correctly.
H02218-11
p. 66)
1
.
p. 94)
p. 51)
65