Table of Contents
Advertisement
10.14
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Observe the accompanying instructions for Husq-
varna Motorcycles accessories.
–
Adjust the air pressure as specified.
Guideline
Air pressure (FC 350 EU)
Air pressure (FC 350 US)
Air pressure (FX 350)
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from
the hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically
after 80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Turn adjuster
Info
Adjuster
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
V01540-10
TUNING THE CHASSIS 10
10.4 bar (151 psi)
10.6 bar (154 psi)
9.8 bar (142 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
1
clockwise all the way.
1
is located at the upper end of the right
p. 51)
47
Advertisement
Table of Contents
