Installing The Shock Absorber - Husqvarna FE 350s 2022 Owner's Manual

12.17

Installing the shock absorber

SERVICE WORK ON THE CHASSIS 12
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
F03469-10
Main work
–
Carefully position the shock absorber into the vehicle from
the bottom.
–
Mount and tighten screw
Guideline
Screw, top
shock absorber
F03470-10
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
F03471-10
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
F03467-02
–
Join plug-in connector of the brake light switch.
F03465-10
8
.
1
.
M10 60 Nm (44.3 lbf ft)
Loctite
A
.
2
.
M16x1.5 100 Nm (73.8 lbf ft)
®
2701™
65