The body is made of borosilicate glass, PMMA or PC. Endcaps are made of aluminum or stainless steel. The mounting plate is made of powder-coated galvanized steel sheet. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
• tightly clamp the power cord in the gland using 2 wrenches, • check the effectiveness of earthing. • install endcap and check for proper sealing. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
3-core cables (with PE wire) with a maximum outer diameter of 8-13mm should be used as power cables. • Use power conductors with a cross-section of 0.5-1.8mm ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
All parts considered as a spare parts must be ordered at manufacturer of light fitting. 11. REPAIRING All repairs may be made only by manufacturer or authorized repair workshops. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Need help?
Do you have a question about the INS242LED Series and is the answer not in the manual?
Questions and answers