Page 1
INSTALLATION AND MAINTENANCE MANUAL FOR LIGHT FITTING INS242LED Carefully read instructions before mounting the light fitting. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 2
WYMIANA ŹRÓDEŁ ŚWIATŁA ....................7 TRANSPORT ORAZ WARUNKI PRZECHOWYWANIA ............. 7 UTYLIZACJA SPRZĘTU ......................8 GWARANCJA ..........................8 ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 3
INS242LED-1200-B2-1 34,4 W -25 do +45˚C INS242LED-1200-B2-3 50,3 W -25 do +40˚C INS242LED-1200-B4-1 68,8 W -25 do +40˚C ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 4
The body is made of borosilicate glass, PMMA or PC. Endcaps are made of aluminum or stainless steel. The mounting plate is made of powder-coated galvanized steel sheet. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 5
• tightly clamp the power cord in the gland using 2 wrenches, • check the effectiveness of earthing. • install endcap and check for proper sealing. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 6
REMARK: during the servicing and maintenance touching of LED are prohibited, because it will decrease the lifetime of light fitting and cause the loss of manufacturer’s warranty. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Page 7
C temperature range, and relative humidity lower than 75%. No corrosion causing vapors or gases should be PRESENT. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58 347 51 07, fax: +48 58 347 51 08...
Need help?
Do you have a question about the INS242LED and is the answer not in the manual?
Questions and answers