Page 4
Device intended for installation in zones 21, 22 dust explosion hazard, providing a „high level of safety” and which will not become Manual No.: I.EXL400LED.01 ATM Lighting sp. z o.o., ul. Budowlanych 31,80-298 Gdańsk, Release date: 22.04.2021 Edition: 1.0...
Used solutions and materials, electrical equipment and proper insulating spaces makes that during normal exploitation there is no possibility any sparks, electrostatic charge, dangerous heating or light fitting destruction caused by environment factors occurrence. Manual No.: I.EXL400LED.01 ATM Lighting sp. z o.o., ul. Budowlanych 31,80-298 Gdańsk, Release date: 22.04.2021 Edition: 1.0...
• Failure to comply with rules of the installation and use can lead to personal injury or property loses. ATM Lighting sp. z o.o. company takes no responsibility in such cases. • Failure to comply with rules included in manual results with void of the manufacturer warranty.
Bolts used to mount light fitting should be properly tightened, washers mustn’t be cracked. Cleanliness of outer surfaces and light fittings surroundings must be checked. Light fittings may not be soiled by Manual No.: I.EXL400LED.01 ATM Lighting sp. z o.o., ul. Budowlanych 31,80-298 Gdańsk, Release date: 22.04.2021 Edition: 1.0...
All parts considered as a spare parts must be ordered at manufacturer of light fitting. Additionally, the replacement of the light source may be performed by ATM Lighting Sp. z o.o and specially trained personnel, using original components supplied by ATM Lighting Sp. z o.o.
All specific information can be found in document „General terms and conditions warranty ATM Lighting sp. z o.o.” available at the website www.atmlighting.pl/en/ Manual No.: I.EXL400LED.01 ATM Lighting sp. z o.o., ul. Budowlanych 31,80-298 Gdańsk, Release date: 22.04.2021 Edition: 1.0...
Need help?
Do you have a question about the EXL400LED-24VDC and is the answer not in the manual?
Questions and answers