Installing The Lower Triple Clamp - Husqvarna FE 450 2021 Owner's Manual

12.10

Installing the lower triple clamp

SERVICE WORK ON THE CHASSIS 12
Main work
–
Remove screw
–
Remove screw
–
Open cable holder
the clutch line.
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
S03552-10
Protect the components against damage by covering
them.
Do not kink the cables and lines.
–
Remove O-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
H03683-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Position the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Mount protective ring
B01632-10
1
.
2
.
3
in front of the left radiator and detach
4 5
and protective ring .
p. 157)
1
2 3
and O-ring .
is correctly posi-
59