Husqvarna FE 450 2021 Owner's Manual page 117

Guideline
(All EU models)
Fuse 1 - 10 A - EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector, fuse 4
Fuse 2 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan, horn, brake light, turn sig-
nal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
(FE US)
Fuse 1 ‑ 10 A - EFI control unit, combination instru-
ment, combination switch (optional), electronic fuel
injection, diagnostics connector, fuel vapor retention
system, fuse 4
Fuse 2 - 10 A - low beam, position light, tail light
Fuse 3 - 10 A - radiator fan
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover
Finishing work
–
Mount the seat. ( p. 68)
–
Install the air filter box cover. (
ELECTRICAL SYSTEM 15
A
.
p. 151)
p. 151)
1
.
p. 69)
115