Led Light; Usb Charging Port; Charger Operation - sunjoe iON100V-18CS-CT-RM Operator's Manual

Cordless chain saw 100-volt max* | 18-inch
Table of Contents

Advertisement

Lights
Light Indicators
The battery is at 20% capacity and
requires charging
The battery is at 50% capacity and
requires charging soon
The battery is at 70% capacity
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge
as needed.
Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells "recover" some of their charge
after resting.

USB Charging Port

iON100V series batteries are equipped with a USB port (or
ports, depending on your model) which can provide 5 V power
for most popular smartphones, tablets, wearables and other
USB devices.
To charge with the battery, connect the USB cable that came
with your device to the USB port (or ports) on your iON100V
series battery and to your device. The charging process will
start immediately (Fig. 14).
USB charging
Fig. 14
ports
iON100V-2.5AMP
NOTE: If you experience any issues with charging your
particular device, ensure that the iON100V battery is
fully charged.
m
WARNING!
Make sure the battery's USB port(s) is not
contaminated with lint or other debris. Use a canned-air
type of product periodically to ensure that the port openings
are clear.
iON100V-5AMP
13

LED light

(iON100V-5AMP batteries only – sold
separately)
The iON100V-5AMP battery is equipped with a 0.35 watt LED
light located on the handle, which is good for camping and
emergency illumination. To turn on the LED light, open the
carry handle, and press the battery push button twice in a row.
To turn off the LED light, press the battery push button twice
again (Fig. 15).
NOTE: This function only comes with iON100V-5AMP battery.
iON100V-2.5AMP battery is not equipped with the handle or
the LED light.
Fig. 15
LED light
Push twice to start/stop

Charger Operation

CORE TOOL
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this chain saw, you will need to additionally
purchase either the iON100V-2.5AMP or iON100V-5AMP
lithium-ion battery and the 100 V quick charger (model
iON100V-RCH). Battery and charger options available at
snowjoe.com.
m
WARNING!
Charge only the iON100V-2.5AMP or
the iON100V-5AMP lithium-ion battery packs in compatible
iON100V-RCH battery charger. Other types of batteries may
cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.

Advertisement

Table of Contents
loading

Table of Contents