Fujitsu ACUH09LUAS1 Design & Technical Manual page 36

 When function setting is "Forced stop" mode
• In the case of "Edge" input
Function
setting /
46-02
• In the case of "Pulse" input
Function
setting /
46-02
Input 1
Input 2
Indoor unit
Remote controller
NOTES:
• When the forced stop is triggered, indoor unit stops and Operation/Stop operation by the re-
mote controller is restricted.
• When forced stop function is used with forming a remote controller group, connect the same
equipment to each indoor unit within the group.
8-4. Details of function
Rotary SW of
External input and
output PCB
- Input of indoor unit
External input and
60-00 / 1
On
Input
Off
Forced stop
Normal
Operation
Indoor unit
Stop
Remote controller
Rotary SW of
External input and
output PCB
External input and
60-00 / 1
On
Off
On
Off
Forced stop
Normal
Operation
Stop
External input
Terminal
Input 1
output PCB
On
External input
Input 1
output PCB
Input 2
On
- 32 -
Input signal Command
Off → On Forced stop
On → Off Normal
Off → On Forced stop
On → Off Normal
On On
Input signal Command
Pulse Forced stop
Pulse Normal
On On
8. External input and output