#
Headlight Bulb
Headlight bolts
Headlight
Connector
Pin
Remove the headlight bolts from the
1.
headlight case.
Gently pull the lower end of the headlight
2.
forward and remove the headlight.
Disconnect the connector.
3.
Remove the seat rubber.
4.
Unhook the pin and remove the bulb.
5.
Install a new bulb and parts in the reverse
6.
order of removal.
u
TOP mark
Tighten the headlight bolts.
7.
Seat rubber
Torque: 3.0 lbf·ft (4.1 N·m, 0.4 kgf·m)
Bulb
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.
Electrical Trouble
Burned-out Light Bulb
u
Install the seat rubber with its TOP
mark facing up.
Continued
79