MX75 Back Panel Functions
Additional functions on the back panel are described below, from left to right.
USB port
WAN / Internet port
LAN ports
Power input
Reset button
Side Panels
MX75
Bottom Panel
USB 3.0 port for debugging.
This port provides connectivity to the WAN.
These 10 ports provide connectivity to computers, printers, access points, or
Ethernet switches.
A steady green LED indicates bidirectional connectivity, and flashing green
indicates traffic.
Designed for use only with the unit's power supply.
Insert a paper clip if a reset is required.
Press for 1 second to delete a downloaded configuration and reboot.
Press and hold for more than 10 seconds to force a full factory reset.
5