Silvercrest SKD 1000 A3 User Manual And Service Information page 132

on the cassette, you can also manually edit the tracks generated by the program. This
process is explained in the AudioLava Help system.

Transport bar: The transport bar is located directly below the graphical view of the
recording, and contains buttons for playing a marked section of the recording (which
you mark using the mouse in the graphical display), for playing the entire recording, for
enlarging or reducing the scale of the graphical display, and for normalisation and
interpolation. You can also use the "Redetect tracks" option to manually repeat the
automatic track detection process.

Declicker: The Declicker is used to remove loud clicks and pops. You can individually
configure this filter function by dragging the slide control with the mouse.

Decrackler: The Decrackler is used to remove frequent short clicks, also referred to as
crackling. You can individually configure this filter function by dragging the slide control
with the mouse.

Declipper: The Declipper is used to correct recordings with digital or analog clipping.
You can individually configure this filter function by dragging the slide control with the
mouse.

Denoiser: For removing static noise (e.g. tape transport noise). You can individually
configure this filter function by dragging the slide control with the mouse.

Additional Effects: This option allows you to add additional effects and tools for
editing your recordings. Further information on this is available in the AudioLava Help
system.
130
Cassette Digitizer SilverCrest SKD 1000 A3
English