Playing The Cassette; Removing The Audio Cassette - Silvercrest SKD 1000 A3 User Manual And Service Information

Cassette Digitizer SilverCrest SKD 1000 A3
Before inserting the cassette, you should make sure that the tape is slightly
tensioned. This is to avoid the tape becoming chewed. Hold the cassette in front
of you with one hand, and using a finger of your other hand, or a pencil, rotate
the right-hand knurled wheel clockwise.
3. Close the cassette compartment by simply pressing down the cover until it clicks into place.

Playing the cassette


You can play, stop, fast forward or rewind the cassette using the PLAY (10), STOP (11), FF
(8) and REW (9) buttons. See the description of the buttons on page 118.

During the playback, you can adjust the volume by turning the volume knob (2) clockwise or
anticlockwise.

Removing the audio cassette

1. If the tape is still playing or if the Fast Forward or Rewind functions are operating, press the
STOP button (11) to stop it.
2. Open the cassette compartment cover by sliding the release button (5) in the direction of the
arrow.
3. Remove the audio cassette from the cassette compartment. First lift the side of the cassette at
which the tape is visible. Insert a fingernail into the upper edge of the cassette and lift it
slightly, so that you can then grip it at both sides and completely remove it from the cassette
compartment.
4. Close the cassette compartment by simply pressing down the cover until it clicks into place.
English 123