Related Manuals for Yard force LH G40
Summary of Contents for Yard force LH G40
- Page 1 LH G60 HT2340 40V HEDGE TRIMMER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 4: Table Of Contents
INTENDED USE LH G60 Original Instructions This cordless hedge trimmer is designed for cutting and trimming of hedges, bushes and ornamental shrub in the domestic environment. For safety reasons it is essential to read the entire instruction manual before first CONTENT operation and to observe all the instructions. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety Electrical safety 1. Stay alert, watch what you are doing and use 1. Power tool plugs must match the outlet. Never modify common sense when operating a power tool. Do the plug in any way. Do not use any adapter plugs not use a power tool while you are tired or under the with earthed (grounded) power tools. - Page 6 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS 7. If devices are provided for the connection of dust 6. Keep cutting tools sharp and clean. Properly extraction and collection facilities, ensure these are maintained cutting tools with sharp cutting edges are connected and properly used. Use of dust collection less likely to bind and are easier to control.
-
Page 7: Product Safety Warnings
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS Service assembled. The use of the hedge trimmer without the Have your power tool serviced by a qualified repair proper guard may result in serious personal injury! person using only identical replacement parts. This will 7. -
Page 8: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS 14. Check the blade and motor mounting bolts at Safety symbols The purpose of safety symbols is to attract your attention frequent intervals for proper tightness. Also, visually to possible dangers. The safety symbols and the inspect blade for damage (e.g., bent, cracked, and explanations with them require your careful attention worn). - Page 9 SYMBOLS SYMBOLS Danger-Keep hands away from blades. Please read all of the safety and operating Contact with blade will result in serious instructions carefully before using this machine. personal injury. Read the instruction manual before operating. WARNING! Failure to follow the warnings and Warning symbols on the charger instructions may result in electric shock, fire Before any use, refer to the corresponding...
-
Page 10: Technical Data
SYMBOLS TECHNICAL DATA Warning symbols on the battery pack Model LH G60 To reduce the risk of injury, user must read Voltage 40 V instruction manual carefully. No load speed 1400 rpm Max. cutting capacity 28 mm Do not throw into water. Blade length 600 mm Measured sound power level(LwA) -
Page 11: Description Of Product
Insert the battery pack with moderate force until it was locks in to place. WARNING: Only use Yard force 40V original battery pack! To remove the battery pack from the tool (Fig. G) Press once release to transport position Press again full releases the battery Remove the battery pack from the tool. -
Page 12: Maintenance And Storage
MAINTENANCE AND STORAGE OPERATION Starting/Stopping the Hedge Trimmer WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should Before operating, remove the blade guard and hold the trimmer with both hands, one hand be performed by a qualified service technician. -
Page 13: Troubleshooting
CE DECLARATION TROUBLESHOOTING To the provisions of Council Directives WARNING! Before performing any repair work, always remove the battery pack. Caution! SUMEC UK Improper repairs can result in the product functioning unsafely. This endangers yourself and Unit A&B Escrick Business Park Escrick, York YO19 6 FD/ United Kingdom your environment. - Page 14 CE DECLARATION CE DECLARATION To the provisions of Council Directives To the provisions of Council Directives MEROTEC GmbH, SUMEC France Sarl Otto-Brenner-Straße 8, 59 bis Rue du Mûrier 47877 Willich/ Deutschland 37540 Saint Cyr Sur Loire, France Declare that the product: Declare that the product: Description: 40V HEDGE TRIMMER Description: 40V HEDGE TRIMMER...