Related Manuals for Yard force LH C45
Summary of Contents for Yard force LH C45
- Page 1 The expert for robots in your home With one click to the online shop myRobotcenter.eu myRobotcenter.co.uk myRobotcenter...
- Page 2 LH C45 M0E-20ET-510 20V HEDGE TRIMMER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 3: Table Of Contents
LH C45 Original Instructions CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Operation Maintenance and storage Troubleshooting CE declaration... -
Page 4: Intended Use
INTENDED USE GENERAL SAFETY WARNINGS Electrical safety This cordless hedge trimmer is designed for cutting and trimming of hedges, bushes and ornamental shrub in the domestic environment. 1. Power tool plugs must match the outlet. Never modify For safety reasons it is essential to read the entire instruction manual before first the plug in any way. - Page 5 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety 7. If devices are provided for the connection of dust 1. Stay alert, watch what you are doing and use extraction and collection facilities, ensure these are common sense when operating a power tool. Do connected and properly used.
-
Page 6: Product Safety Warnings
GENERAL SAFETY WARNINGS PRODUCT SAFETY WARNINGS 6. Keep cutting tools sharp and clean. Properly Service Have your power tool serviced by a qualified repair maintained cutting tools with sharp cutting edges are person using only identical replacement parts. This will less likely to bind and are easier to control. - Page 7 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS assembled. The use of the hedge trimmer without the 14. Check the blade and motor mounting bolts at proper guard may result in serious personal injury! frequent intervals for proper tightness. Also, visually 7. Use both hands when operating the hedge trimmer. inspect blade for damage (e.g., bent, cracked, and Using one hand could cause loss of control and result worn).
-
Page 8: Symbols
SYMBOLS SYMBOLS Safety symbols Please read all of the safety and operating The purpose of safety symbols is to attract your attention instructions carefully before using this machine. to possible dangers. The safety symbols and the Read the instruction manual before operating. explanations with them require your careful attention and full understanding. - Page 9 SYMBOLS SYMBOLS Warning symbols on the battery pack Danger-Keep hands away from blades. Contact with blade will result in serious To reduce the risk of injury, user must read the personal injury. instruction manual carefully. Do not throw into water. Disconnect the battery pack before any repair or maintenance.
-
Page 10: Technical Data
SYMBOLS TECHNICAL DATA Warning symbols on the charger Model LH C45 Voltage 20 V To reduce the risk of injury, user must read the instruction manual carefully. No load speed 1300 rpm Max. cutting capacity 16 mm Blade length 510 mm The charger is for indoor use only. -
Page 11: Description Of Product
DESCRIPTION OF PRODUCT OPERATION Charging the battery pack Parts description NOTE: Remove the battery pack from the charger after it has been fully charged. Blade Safety button NOTE: Battery should be fully charged before first use. ON/OFF trigger NOTE: Make sure the mains voltage is the same as rating label which is located on the Battery pack slot charger. -
Page 12: Operation
OPERATION OPERATION Cutting Tips Demount the blade shield WARNING: To prevent serious personal injury, keep hands away from blades. Do not attempt to remove cut material or hold material to be cut when the blades are moving. Make sure that To insert the battery pack the blades have totally stopped Align the groove on the battery pack with the corresponding ribs in the receptacle of the... -
Page 13: Maintenance And Storage
MAINTENANCE AND STORAGE TROUBLESHOOTING WARNING: When servicing, use only identical replacement parts. Use of any other parts may WARNING! create a hazard or cause product damage. To ensure safety and reliability, all repairs should Before performing any repair work, always remove the battery pack. be performed by a qualified service technician. - Page 14 Declare that the product: Declare that the product: Description: 20V HEDGE TRIMMER Description: 20V HEDGE TRIMMER Model No. LH C45/ M0E-20ET-510 Model No. LH C45/ M0E-20ET-510 Function: Trimming of hedges bushes Function: Trimming of hedges bushes Complies with the essential health and safety requirements of the...
-
Page 15: Ce Declaration
59 bis Rue du Mûrier 37540 Saint Cyr Sur Loire, France Declare that the product: Description: 20V HEDGE TRIMMER Model No. LH C45/ M0E-20ET-510 Function: Trimming of hedges bushes Complies with the essential health and safety requirements of the following directives:...