Related Manuals for Yard force LH C50
Summary of Contents for Yard force LH C50
- Page 1 LH C50 GY2271 40V HEDGE TRIMMER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 3: Table Of Contents
LH C50 Original Instructions CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Operation Maintenance and storage Troubleshooting CE declaration... -
Page 4: Intended Use
INTENDED USE GENERAL SAFETY WARNINGS This cordless hedge trimmer is designed for cutting and trimming of hedges, Electrical safety bushes and ornamental shrub in the domestic environment. 1. Power tool plugs must match the outlet. Never modify For safety reasons it is essential to read the entire instruction manual before first operation and to observe all the instructions. - Page 5 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety 7. If devices are provided for the connection of dust 1. Stay alert, watch what you are doing and use extraction and collection facilities, ensure these are common sense when operating a power tool. Do connected and properly used.
-
Page 6: Product Safety Warnings
GENERAL SAFETY WARNINGS PRODUCT SAFETY WARNINGS 6. Keep cutting tools sharp and clean. Properly Service Have your power tool serviced by a qualified repair maintained cutting tools with sharp cutting edges are person using only identical replacement parts. This will less likely to bind and are easier to control. - Page 7 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS assembled. The use of the hedge trimmer without the 14. Check the blade and motor mounting bolts at proper guard may result in serious personal injury! frequent intervals for proper tightness. Also, visually 7. Use both hands when operating the hedge trimmer. inspect blade for damage (e.g., bent, cracked, and Using one hand could cause loss of control and result worn).
-
Page 8: Symbols
SYMBOLS SYMBOLS Safety symbols Please read all of the safety and operating The purpose of safety symbols is to attract your attention instructions carefully before using this machine. to possible dangers. The safety symbols and the Read the instruction manual before operating. explanations with them require your careful attention and full understanding. - Page 9 SYMBOLS SYMBOLS Warning symbols on the battery pack Danger-Keep hands away from blades. Contact with blade will result in serious To reduce the risk of injury, user must read personal injury. instruction manual carefully. Warning symbols on the charger Do not throw into water. Before any use, refer to the corresponding paragraph in the present manual.
-
Page 10: Technical Data
TECHNICAL DATA DESCRIPTION OF PRODUCT Parts description (Fig. A) Model LH C50 Blade sheath Blade Voltage 40 V (2 x 20 V) Guard Front handle No load speed 1600 rpm Safety switch Max. cutting capacity 20 mm Handle rotating button... -
Page 11: Operation
When trimming the sides of the hedge, begin at the bottom and cut upwards. WARNING: Only use Yard force 20V original battery pack! To remove the battery pack from the tool (Fig. G) Press full releases of the battery button. Remove the battery pack from the tool. -
Page 12: Maintenance And Storage
MAINTENANCE AND STORAGE TROUBLESHOOTING WARNING! WARNING: When servicing, use only identical replacement parts. Use of any other parts may Before performing any repair work, always remove the battery pack. create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician. -
Page 13: Ce Declaration
Otto-Brenner-Straße 8, 47877 Willich/ Deutschland Declare that the product: Description: 40V Hedge trimmer Model No. LH C50/ GY2271 Function: Trimming of hedges bushes and ornamental shrub Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/EC...