Table of Contents
Advertisement
6.1
Optional Fresh Air Intake Kit Installation
THE IMAGES SHOWN ARE INDICATIVE ONLY AND MAY DIFFER OF YOUR PRODUCT, BUT THE
ASSEMBLY REMAINS THE SAME.
This mobile home approved stove requires the installation of a fresh air intake kit (A) and an
insulated fresh air intake pipe (HVAC type, must meet ULC S110 or UL 181 class 0 or class 1) (B),
sold separately. Refer to air intake kit installation instructions for more details.
A
B
The following steps must be completed before you can install the optional fresh air inlet.
1. Remove the two screws (C) located at the back of the stove that hold the heat shield under
the wood stove.
C
Installation and Operation Manual - Déco Nano
Page 23
Advertisement
Table of Contents
