Advertisement
Fitting and/or Replacing Batteries
The Electronic Play Tray requires 3 x "AA" 1.5 Volt alkaline type batteries (not
included).
• Batteries must only be fitted by an adult.
• To fit and/or replace batteries: Loosen the screw on the battery compartment
cover with a suitable screwdriver, press the tab and remove the battery
compartment cover. Then remove the spent batteries and fit new ones,
ensuring that they have been fitted in the correct polarity, as shown inside the
battery compartment. Replace the battery cover and tighten the screw.
• Always keep batteries and tools out of reach of children.
• Always remove spent batteries from the Mobile to avoid the danger of possible
leakage from the battery.
• Always remove the batteries if the Mobile will not be used for a long period.
• Only use alkaline batteries of the same type or equivalent to the type
recommended for the correct function of this product.
• Never mix new and old batteries, or different types of batteries.
• Do not burn or dispose of spent batteries into the environment. Dispose of
spent batteries at an appropriate differentiated collection point.
• Do not short-circuit the battery terminals.
• Do not attempt to recharge non-rechargeable batteries: they might explode.
• The use of rechargeable batteries is not recommended, since they could impair
the functionality of the Mobile.
• If rechargeable batteries are used, take them out of the toy before recharging
them. Batteries must always be recharged under adult supervision.
WARNING
41
Advertisement
