Installation - Klarstein ZARAH 60 Manual

EN
18

INSTALLATION

Preparation
If you have an outlet to the outside, your cooker hood can
be connected as below picture by means of an extraction
duct (enamel, aluminium, flexible pipe or inflammable
material with an interior diameter of 150 mm).
• Before installation, turn the unit off and unplug it from
the outlet.
• The cooker hood should be placed at a distance of
65~75 cm above the cooking plane for best effect.
Installation (Vent outside)
Note: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10
1
Drill 3 x 8 mm holes to accommodate
the bracket. Screw and tighten the
bracket onto the wall with the screws &
screw plugs provided.
-5
Bar).
Offer up the cooker hood and hang
onto the wall bracket hook.
2