Replacing The Lamp - Klarstein ELEONORA Manual

EN

REPLACING THE LAMP

Changing the round LED lights
• Remove the grease filter.
• Using a straight screwdriver, lift out the LED light. Then pull out the lamp base
connection wire slightly and remove the terminal of the lamp base connection wire.
• Use the reverse procedure to reinstall the fixture.
Changing the coloured LED light strip
• Open the glass cover.
• Use a screwdriver to remove the control box cover and lamp holder.
• Remove the terminal of the lamp connection wire and insert a new lamp.
Max. ILCOS D
Voltage Dimensions: 64 mm
power code
DSR-
2x 1.5 W DC 12 V
1.5/65-S-64
35