Using An External Water Filter - Miele F 29 2 Vi Series Operating And Installation Instructions

Once the IntensiveClear 2.0 charcoal fil-
ter has been replaced, the water filter
display  must be reset using Settings
mode  on the display (see "Selecting
additional settings – Resetting the
Filter Display ").
After inserting a new water filter, dis-
pose of all ice cubes produced in the
next 24 hours following the change.

Using an external water filter

If an external water filter is attached to
your household water supply, use an In-
tensiveClear 2.0 mesh filter in place of
an IntensiveClear 2.0 charcoal filter.
Water
Water filter
105