Table of Contents
Advertisement
Frequently Asked Questions
Message
"
F Please contact Miele
Technical Service.
pears in the display and
an alarm sounds.
is shown in the dis-
play. The machine does
not get cold, but the
machine controls are
working.
114
Possible cause and solution
There is a fault.
" ap-
Make a note of the fault message if necessary.
Contact Miele Service.
To turn the alarm off, touch the symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
The voltage level is too high/low.
Observe the connection data under "Electrical
connections".
Contact Miele Service if necessary.
To turn the alarm off, touch the symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
Demo Mode
appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.
Switch off Demo mode (see "Selecting additional
settings", section "Switching off
is switched on. Demo mode allows the
").
Demo Mode
Hide quick links:
Advertisement
Table of Contents
