Page 3
III III III III III III II II II II VIII Technical Data,Safety Instructions, Speci ed Conditions of Use, Declaration of Conformity, Batteries, Maintenance, Symbols Please read and save these instructions!
ware of the power tool will run out of balance, vibrate excessively WARNING! and may cause loss of control. Read all safety warnings and all instructions. Failure to g) Do not use a damaged accessory. Before each use inspect follow the warnings and instructions may result in electric shock, the accessory such as abrasive wheels for chips and cracks, re and/or serious injury.
Page 21
use auxiliary handle, if provided, for maximum control over d) Do not restart the cutting operation in the workpiece. Let kickback or torque reaction during start-up. The operator can the wheel reach full speed and carefully re-enter the cut. The control torque reactions or kickback forces, if proper precautions wheel may bind, walk up or kickback if the power tool is restarted in are taken.
For battery pack storage longer than 30 days:, Store the battery please contact one of our Milwaukee service agents (see our list of pack where the temperature is below 27°C and away from moistu- guarantee/service addresses).
EC DECLARATION OF CONFORMITY SYMBOLS We declare under our sole responsibility that the product described under “Technical Data” ful lls all the relevant provisions of the CAUTION! WARNING! DANGER! directives 2011/65/EU (RoHS) Please read the instructions carefully before starting the 2006/42/EC machine.