BOMANN SBS 7323.1 IX Instruction Manual page 21

Control lamps
1 Temperature
display freezer
2 Temperature
Display fridge
3 Door alarm function
Function buttons
MODE: Selection of functions
Press several times to choose between:
SUPER COOL -> SUPER FREEZE -> HOLIDAY
The corresponding control lamp flashes.
FREEZER: Temperature setting freezing
Allows you to regulate the inside temperature in the
range of -15°C to -25°C.
FRIDGE: Temperature setting cooling
Allows you to regulate the inside temperature in the
range of +2°C to +8°C.
UNLOCK 3s: Child safety lock
Press the button for about 3 seconds to lock/unlock
the operation of the control panel.
Description of the functions
Super cool / Super freeze
When the super cooling or freezing function is acti-
vated, the device operates at maximum power to
speed up the cooling or freezing process.
The super cooling function switches off automatically
after about 180 minutes and the super freezing func-
tion after about 26 hours. The respective internal
temperature adapts to the preset temperature.
The functions can be ended at any time before the
switch-off times have expired by pressing the
FRIDGE or FREEZER button.
4 Super cooling
5 Super freezing
6 Holiday mode
7 Child safety lock
Holiday mode
CAUTION:
Do not store any fresh or perishable food in the fridge
during this time.
Cause of longer absence you can put the appliance
into holiday mode.
During this period, the fridge is cooled down to
+15°C instead of +5°C to +8°C. It does not only save
energy, but also prevents unpleasant odors and
mold, as the fridge is not completely switched off.
The cooling in the freezer is not affected and contin-
ues to cool at min. -18°C.
Pressing the FRIDGE or FREEZER button stops the
function.
Door alarm function
As soon as the fridge or freezer door remains open
for more than two minutes, an alarm sounds every
minute and the warning lamp lights up. After approx.
10 minutes the alarm switches off automatically, if
the doors were not closed prematurely.
Starting the appliance
 Connect the appliance to the power supply.
 Set the operating conditions. See also the follow-
ing section "Settings".
Settings
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, adjust the lowest possible
temperature level (= highest power level), or select
the super cool / freeze function first, until the appli-
ance has reached the desired operating temperature.
Afterwards it is recommended to turn the control
back to a medium setting; correcting the temperature
at a later point would then be easier.
21