technetix AIMA3000.FT5X Product User Manual page 48

STAT is Amber
STAT is red
May/2016 - Version 1.0
Operating environment Temperature is lower
or higher.
+12V /+5V /-5VInput Voltage is lower or higher.
RF input is lower or higher.
Laser Warning ALM or Laser shutdown. ("Laser
Output Status Alarm "is set "Enable Minor")
Operating environment Temperature is too high
or too low.
+12V /+5V/-5V Input Voltage too high or
too low.
RF input power too high or too low.
Laser Critical ALM or Laser shutdown. ("Laser
Output Status Alarm "is set "Enable Major")
Technetix Group Limited
sales@technetix.com
AIMA3000.FT5X Product User Manual
Check the Fans, or lower the room
temperature. If the temperature is normal,
please contact Technetix technical support.
Please contact Technetix technical support.
Adjust input signal or adjust MGC to an
appropriate value.
Check the laser's status.
Check the Fans, or lower the room
temperature. If the temperature is normal,
please contact Technetix technical support.
Please contact Technetix technical support.
Adjust input signal or adjust MGC to an
appropriate value.
Check the laser's status.
• technetix.com 48