Usb Connector & Pinout - IDENTEC SOLUTIONS iPOINT Si Hardware User Manual

iPOINT – Hardware User Manual | 18.06.2020
Pin To Master
1 RxD+
2 RxD–
3 TxD+
4 V+ (10 ... 30V)
5 V+ (10 ... 30V)
6 TxD–
7 GND
8 GND
As the TxD/RxD crossing is done by the pinout of the connectors, simple straight cabling has to be used.
Connection parameters
Signal levels: RS422
Baud rate: 115200 bits per second
Data bits: 8
Stop bits: 1
Parity: none
Mode: half duplex
2.3.3 USB Connector & Pinout

A Standard Mini-USB Cable and connector can be used to connect to the iPOINT

Standard 5V power is supplied to the device
View into the connector (female, receptacle)
Pin Description
1 +5V
2 Data -
3 Data +
4 ID / not Connected
5 GND
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
To Slave T568B color
TxD+ White/orange
TxD– Orange
RxD+ White/Green
V+ (10 ... 30V) Blue
V+ (10 ... 30V) White/Blue
RxD– Green
GND White/Brown
GND Brown
Colour
Red
White
Green
None
Black
Description
Power supply over bus
Power supply over bus
Power supply over bus
Power supply over bus
15