Frigidaire FAS256N2A Owner's Manual page 7

Air Conditioner Features
(continued)
TO USE
AUTO COOL FEATURE:
Note: Fan speed starts at HI and adjusts to a slower and slower speed as the room temperature indictates. For example, if the
room doesn't get too warm it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened,
it will automatically go to the highest speed. The fan speeds will adjust back to the slowest speed as the room returns to the
original set temperature.
TO OPERATE ON FAN ONLY:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember
to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any
fan speed you prefer.(Except"Auto cool").
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
TO USE THE
POWER SAVER FEATURE
Note: In this mode, the fan will continue to run for another 3 minutes after the compressor shuts off. The fan then cycles on for
2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the cooling system turns
back on.
DO THIS:
PRESS AUTO
COOL
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
LIGHT
ON
DO THIS:
PRESS
MODE BUTTON
CHOOSE
ENERGY SAVER
LIGHT
ON
7
LIGHT ON
YOU WILL SEE:
YOU WILL SEE:
YOU WILL SEE: