Frigidaire FAS256N2A Owner's Manual page 9

Air Conditioner Features
(continued)
CLEAN AIRE FEATURE
Note: When this feature is "ON," the ion generator is energized and will help to remove pollen and impurities from the air, and
trap them in the filter.
REMOTE SENSING FEATURE
DO THIS:
PRESS SENSING
START BUTTON
Note: This feature can be activated from the remote control ONL
To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing stop button.
The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each time
it sends a signal. It will continue to send this signal until the feature is deactivated by pressing the remote sensing stop button.
If the unit does not receive the remote sensing signal during any 3 minute interval, the unit will beep to indicate the remote
sensing mode has ended. The display on the remote control indicates the temperature at the remote ONLY. The Actual
Temperature Can Be displayed at the unit by pressing the fan only mode. When in the "Cool" mode, the unit display indicates
the set temperature.
TO TURN UNIT OFF:
:
(on some models)
(on some models)
LIGHT
Pulsing
On & Off
Intermittently
Note:unit display show
"set"temmperature
DO THIS:
PRESS ON/OFF
PAD
:
YOU WILL SEE:
Y .
DO THIS:
PRESS ON/OFF
BUTTON
9
YOU WILL SEE:
Note:remote display is actual
temperature at remote control only
YOU WILL SEE: