Safety Instructions; Symbols And Icons - Parkside PBSA 12 D2 Translation Of The Original Instructions

GB IE
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B2.
This type of battery may only be charged
with the following chargers: PLGK 12 A1,
PLGK 12 A2.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when
the electric tool is switched off and
times when it is switched on but
running without any load).

Safety instructions

Ensure that the safety instructions
are observed when operating the
appliance.
20

Symbols and icons

Symbols on the appliance:
Carefully read these operat-
ing instructions.
This device is part of the
Parkside X 12 V TEAM
series
Electrical appliances must
not be disposed of with the
domestic waste.
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Hazard symbol with
information on the pre-
vention of personal in-
jury caused by electric
shock.
Instruction symbols with infor-
mation on preventing dam-
age.
Help symbols with informa-
tion on improving tool han-
dling.