Safety; General Safety - Toro Z Master Professional 7000 Series Operator's Manual

Servicing the Engine Oil.................................... 40
Fuel System Maintenance ................................... 44
Servicing the Fuel Filter and Water
Seperator ...................................................... 44
Servicing the Fuel Tank..................................... 45
Electrical System Maintenance ........................... 46
Electrical System Safety ................................... 46
Servicing the Battery......................................... 46
Servicing the Fuses .......................................... 47
Drive System Maintenance .................................. 48
Adjusting the Tracking ...................................... 48
Checking the Tire Pressure............................... 48
Checking the Wheel-Hub Slotted Nut................ 49
Adjusting the Caster-Pivot Bearing ................... 49
Servicing the Gearbox ...................................... 49
Adjusting the Electric Clutch ............................. 50
Cooling System Maintenance .............................. 52
Servicing the Cooling System ........................... 52
Brake Maintenance ............................................. 53
Adjusting the Parking Brake.............................. 53
Belt Maintenance ................................................ 54
Inspecting the Belts .......................................... 54
Replacing the Mower Belt ................................. 54
Adjusting the Mower Belt Tension ..................... 55
Replacing the PTO-Drive Belt ........................... 56
Replacing the Pump Drive Belt ......................... 56
Replacing and Tensioning the Alternator
Belt................................................................ 57
Controls System Maintenance ............................. 58
Adjusting the Control Handle Neutral
Position ......................................................... 58
Hydraulic System Maintenance ........................... 59
Hydraulic System Safety................................... 59
Servicing the Hydraulic System ........................ 59
Setting the Hydraulic Pump Neutral
Position ......................................................... 62
Mower Deck Maintenance.................................... 64
Leveling the Mower at 3 Positions ..................... 64
Servicing the Cutting Blades ............................. 66
Replacing the Grass Deflector .......................... 69
Cleaning .............................................................. 70
Cleaning under the Mower Deck ....................... 70
Disposing of Waste........................................... 70
Storage ................................................................... 70
Storage Safety.................................................. 70
Cleaning and Storage ....................................... 70
Troubleshooting ...................................................... 72
Schematics ............................................................. 74

Safety

This machine has been designed in accordance with
ANSI B71.4-2012.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Always keep the roll bar in the fully raised and
locked position and use the seat belt.
•
Do not operate the machine near drop-offs,
ditches, embankments, water, or other hazards, or
on slopes greater than 15 degrees.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep children and bystanders out of the operating
area. Never allow children to operate the machine.
•
Stop the machine, shut off the engine, and remove
the key before servicing, fueling, or unclogging
the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this manual.
4