Toro Z Master Professional 7000 Series Operator's Manual page 15

The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
1. Safety-interlock symbols
2. Hour meter
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure 5).
Neutral-Lock Position
Use the N -
EUTRAL LOCK
safety-interlock system to engage and to determine
the N position.
EUTRAL
Glow-Plug Light
The glow-plug indicator light turns on when the
glow-plug button is engaged
Glow-Plug Switch
This switch activates the glow plugs and is indicated
by the glow-plug light. Hold down the glow-plug switch
for 10 seconds prior to starting the machine.
Temperature Light
The temperature light comes on when the engine is
overheating (Figure 5).
Figure 6
3. Battery light
to F
LOW
position with the
(Figure 5).
Audible Alarm
This machine has an audible alarm that alerts the
user to shut off the engine; otherwise, engine damage
can occur from over heating. Refer to
Maintenance (page
Fuel-Selector Valve
The fuel-selector valve is located behind the seat.
Close the fuel-selector valve when transporting or
storing the machine.
Move the selector valve to the left or right position for
g009610
operation.
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades
AST
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
15
Cooling System
52).
(Figure 5).