Charcoal Filters - Miele DA 2668 Operating And Installation Instructions

Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, press
the operating hours control  for
approx. 3 seconds, until only 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
 Press the operating hours
control  for approx. 6 seconds,
until only 1 is flashing.
Cleaning and care

Charcoal filters

With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
The charcoal filters are fitted in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele Webshop, the Miele Spare
Parts Department (see end of this
booklet for contact details) or from your
Miele dealer. The type of charcoal filter
required is listed under "Technical data"
at the back of this booklet.
Fitting/replacing charcoal filters
 Before fitting or replacing a charcoal
filter, the panel and the grease filters
must first be taken out (see previous
section for instructions on how to do
this).
 Take the charcoal filters out of their
packaging.
 Press the charcoal filters into the
frame.
 Replace the grease filters.
37