Setting Up Con@Ctivity - Miele DA 2668 Operating And Installation Instructions

 Touch the  control.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will flash
on and off. The connection has now
been disconnected.
 Quit signing-off mode on the cooker
hood by pressing the run-on
control .
The WiFi connection has now been
disconnected. A new connection can
now be set up.
Before using for the first time

Setting up Con@ctivity

Con@ctivity is the direct communication
system between an electric Miele hob
and a Miele cooker hood. It enables the
cooker hood to operate automatically
depending on the operational state of a
Miele hob with onset controls.
- When the hob is switched on, the
cooker hood lighting comes on
automatically and then after a short
time the fan also comes on.
- The cooker hood selects the power
level automatically during cooking.
The power level selected by the
cooker hood depends on the number
of cooking zones being used and
their power levels.
- After switching the hob off the fan
and the hob lighting will switch off
automatically after a specified period
of time.
See "Operation" for detailed information
about this function.
21