Use Your Earpieces; Connect The Earpieces To Your Bluetooth Device; Control Anc (Active Noise Cancelation) - Philips 5000 Series User Manual

4 Use your
earpieces
Connect the earpieces to
your Bluetooth device
Turn on the Bluetooth function of
your Bluetooth device.
Open the top cover from charging
box.
The blue LED ashes.
The earpieces will search the
last connected Bluetooth device
and reconnect to it automatical-
ly. If the last connected device is
not available, the earpieces will
enter pairing mode.
Tip
 The earpieces cannot connect to more than 1
device at the same time. If you have two paired
Bluetooth devices, only turn on the Bluetooth
function of the device that you want to connect.
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manually.
Note
 If the earpieces fail to connect to any Bluetooth
device within 5 minutes, it will turn o
automatically to save the battery life.
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
Control ANC (active noise
cancelation)
Enable ANC
Di erent ANC mode can be toggled via
double tap on the right earpiece.
• ANC function is auto active when
put into the ear.
• Touch the MFB button twice, it will
change to Awareness mode.
• Touch the MFB button twice again,
it will turn the ANC function o .
ANC O
ANC ON
Tip
 By removing the earpiece, it will automatically
change to sleep mode. When put earpiece back,
it will return to active mode.
Task
Multi-
function
button
Right
ANC ON
earpiece
Awareness Right
mode earpiece
ANC OFF Right
earpiece
Attention Right
mode earpiece
Awareness
mode
Operation
Double tap
Double tap
Double tap
Tap and
hold